D link router lan setup

Did you try restarting the clients after you have changed the DNS servers? You can check the configuration on Windows the following way:.

Today it just started working.. Thanks for the tips!! Thanks mate, this information was quite helpful. Being a newbie in dlink, I was finding it difficult to change the password. Notify me of followup comments via e-mail. You can also subscribe without commenting. Getting started Before we can connect our D-Link router to the internet we need to figure out how we can connect it. We need to set the router in Bridge or DMZ mode. You might have to reboot the modem after you connected the D-Link router.

Setup a strong password First, we are going to change the default password. Click on next when done 4. Select your Timezone A pretty simple one, select your time zone. Nothing to explain here… 5.

Configure your internet connection The most important step, we are going to configure the internet connection. Use this when you have a modem from your ISP. Just select DHCP and click next. We will configure the DNS later , just click next. Enter the credentials and click on next. Configuring the 2. This way all wireless devices can connect to the router Enable auto scan , this way the router will find the least crowded wifi channel Channel width, an important one.

If you live in an area with a lot of wireless devices around you like an apartment building , then you need to changes the channel width to 20Mhz. Narrowing down the bandwidth will give your less interference and resulting in a better and faster wifi connection.

This will give you to most speed and maximum distance. Scroll down to Pre-Shared key, fill in a new password for your wifi. Use the same password of both wifi networks 2. Configure the 5Ghz band Use the same settings as for the 2.

Only add 5Ghz to the wireless network name. Never leave your guest wifi on-secured, otherwise, everybody can use your internet connection. Scroll down to Pre-Shared key and make a strong but easy to remember password for your guest. Click on Save Settings You will now see an extra wifi network in your house. Prioritize Network Traffic with QoS To speed up your internet connection we can also prioritize important network traffic.

Select Strict Priority Queue By default, there are already some rule created The default rules are in basic fine, but if you have a game console and you play online then you might want to prioritize all the traffic from the console.

Power on the D-Link router Hold the reset button for atleast 10 seconds with a paperclip Wait 15 second until the router is restarted The default login is Admin with no blank password Other articles you may like: Best Home Network setup Monitor your home network for free Tweet. Although older devices may include a setup wizard CD instead of a Wi-Fi configuration card, your box should include:. Quick Setup Instructions. Step 2: Connect the Ethernet cable to the WAN or internet port of both your modem and router, connecting the two.

WAN ports are normally yellow. Note: This wizard will only appear at the first configuration. If your router has been configured previously, you will need to reset it to go through the setup. To reset your device to default settings , press and hold the reset button on the back of the router for 10 seconds and release. The lights on the front of the router should all flash and reboot. If you still need additional assistance, please visit support.

All rights reserved. Connect with. Remember Me. Username or Email. If you do not have this information, contact your Internet service provider ISP. Do not proceed until you have this information. Contact Us. Sign In. Authored by: Support.

With decades of experience, our Tech Pros are passionate about making technology work for you. We love feedback! In the box you may have some of the following: The router's power supply or charger. Device manual. Driver disc for some models. USB cable for some models.

Network cable for some models. Locate the power cable and connect it to a power source like an outlet or surge protector. Plug the other end of the power cable to the router's power input, which is typically located in the rear. Your router should power on. Your router must be connected to a modem in order to provide the local network with an Internet connection.

Acquire an Ethernet cable. Take one end of the cable and plug it into the Internet or WAN port on the rear of your router. The port may be blue or grey. Take one end of the cable and plug it into an available Ethernet or LAN port on the rear of your modem.

These ports are typically yellow. Usually this is all that is needed to connect your router to a wired connection. We're here to help! Related articles. Some devices or systems do not allow special characters or they may have their own requirements.

Passwords should be long, characters or more. Passwords should be something easy for you to remember, but hard for others to guess or lookup. Passwords should have lots of different character types: upper and lower case letters, numbers, and symbols. Replacing letters with symbols is a simple way to achieve this: use for a, and for c, as example. Passwords are personal, most services have a way to create a 'linked' account or share services with trusted friends and family.

Change passwords regularly.