SFP Error: [2]. An error occurred during the installation of assembly component [2]. For more information, see Assemblies. Help and Support may have published a KB article that discusses the installation of this assembly. Go to the Search the Support Knowledge Base page and search for articles that discuss this Windows Installer error message.
An error occurred during the installation of assembly '[6]'. Please refer to Help and Support for more information. The assembly is not strongly named or is not signed with the minimal key length. The signature or catalog could not be verified or is not valid.
One or more modules of the assembly could not be found. Service '[2]' [3] could not be configured. This could be a problem with the package or your permissions. Verify that you have sufficient privileges to configure system services.
For information, see Using Services Configuration. Available beginning with Windows Installer 5. Only one of them should be present. This is a problem with the package. Multiple conditions '[2]' and '[3]' have resolved to true while installing Object [4] from table [5]. This may be a problem with the package. SDDL string '[2]' for object [3] in table [4] could not be resolved into a valid Security Descriptor.
Could not set security for service '[3]'. Verify that you have sufficient privileges to modify the security permissions for this service. You do not have sufficient privileges to complete the re-advertisement of this product. This message is returned as a warning, and the installation continues, if Windows Installer is unable to set a shortcut property specified in the MsiShortcutProperty table. Detection of running applications failed, could not get performance data.
Registered operation returned : [2]. Detection of running applications failed, could not get performance index. Table: [3] Col : [4]. Database: [2] GenerateTransform: More columns in base table than in reference table. Table: [3]. Database: [2]. MergeDatabase will not write any changes because the database is open read-only.
MergeDatabase: A reference to the base database was passed as the reference database. MergeDatabase: Unable to write errors to Error table. Could be due to a non-nullable column in a predefined Error table. When troubleshooting embedded streams, you may use WiStream.
Failed to get network resource information. Error [2], network path [3]. Extended error: network provider [5], error code [4], error description [6].
Invalid CRC checksum value for [2] file. Patch file [2] is corrupt or of an invalid format. Attempting to patch file [3]. GetLastError: [4]. The file [2] is marked as compressed, but the associated media entry does not specify a cabinet. The maximum depth of any feature is This error is returned if a feature that exceeds the maximum depth exists. May occur if the first 40 characters of two or more component names are identical.
Ensure that the first 40 characters of component names are unique to the component. The volume label '[2]' on the media you're running from does not match the label '[3]' given in the Media table. This is allowed only if you have only 1 entry in your Media table. The selection manager is responsible for determining component and feature states.
A standard action or custom action made a call to a function requiring the selection manager before the initialization of the selection manager. This action should be sequenced after the costing actions. The directory manager is responsible for determining the target and source paths.
A standard action or custom action made a call to a function requiring the directory manager before the initialization of the directory manager. Custom action '[2]' has caused an unhandled exception and has been stopped. This may be the result of an internal error in the custom action, such as an access violation.
This error is caused by a custom action that is based on Dynamic-Link Libraries. Perform package validation and check for ICE Transform [2] invalid for package [3]. The property '[2]' was used as a directory property in one or more tables, but no value was ever assigned.
The InstallExecuteSequence may have been authored incorrectly. Actions that change the system must be sequenced between the InstallInitialize and InstallFinalize actions. Subscription auto-renews at the end of the term Learn more. Fixing Msnmsgs. Average User Rating. View Other msnmsgs. What are msnmsgs. General msnmsgs. The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package "msnmsgs.
Runtime Error! How to Fix msnmsgs. Step 1: Restore your PC back to the latest restore point, "snapshot", or backup image before error occurred. In the search results, find and click System Restore. Follow the steps in the System Restore Wizard to choose a relevant restore point. The installer also enables the advertisement of applications and features according to the operating system. For more information, see Platform Support of Advertisement. This documentation describes Windows Installer 5.
Not all the capabilities available in later Windows Installer versions are available in earlier versions. This documentation does not describe versions earlier than Windows Installer 2. Installation packages and patches that are created for Windows Installer 2. Windows Installer 3. The installer can apply patches in a specified order regardless of the order that the patches are provided to the system.
Patching using Windows Installer 3. Patches installed with Windows Installer 3. The installer can be used to read, edit, and replace source lists for network, URL, and media sources. Administrators can enumerate across user and install contexts, and manage source lists from an external process. Windows Installer 4. If all the packages in the transaction cannot be installed successfully, or if the user cancels the installation, the Windows Installer can roll back changes and restore the computer to its original state.
Hope this helps. And check the rights on your source, you most likely have a rights issue here. Maybe there is not enough space on the target machine to cache the MSI. And please delete the messages above which contain useless log entries. This would make the thread readable again. Posted by: AngelD 15 years ago. Log the installation to get some more feedback regarding the error. Posted by: mkali 15 years ago.
Here is my step. Copy the files msnmsgs. Edit the msi by Orca, change the MsgrFeat attributes value from 24 to 16 3. Add "AdvtExecuteSequence" table from sequence. Any other way to install successfully? Any suggestion? From there going further up, you see lines with 'rollback' in it, go past them to find the lines with the error and return code of '3'.
Copy about 10 lines around the error to your next answer, so we can get a look at what's wrong. Posted by: dgdavis 15 years ago. I had no issues with this.
Once I'd got the MsnMsgs. Is this? MSI s F []: Invoking remote custom action. The installer has encountered an unexpected error installing this package. This may indicate a problem with this package.
The error code is Hi mkali, good start. But scroll further up, there will be more errors. Look for an action with error and return code 3. You have to find the initial error, which caused all the mess. I copy all sentences with "error" to here. Action ended InstallFinalize. I tried. But it did not prompt up any error screen for me. Just rollback and said it have not installed to my machine
0コメント