The two methods used to conceal the thru-bolts are using screw caps or a faceplate. Use the below instructions to remove the appropriate deadbolt. Push the bolt into the lock with your finger as your putting the cover back on and it should seat correctly, as other posters have suggested the grease on the internal mechanism looks 20 years old so you might consider cleaning it off with some metho and applying a fresh batch.
The Lockwood would have to be regarded as the benchmark of automatic deadlatches on the market today. Strength, durability, attractive design and high quality construction have combined to make the an ideal lock for all domestic and many commercial applications. Features and Functions: Automatic double cylinder deadlatch for timber frame sc lockwood strike retrofit 31mm new sp. The as we know it today has now become digital. Mark latch hole position as shown. The benchmark of all deadlatches.
Its many features include: It has a unique safety release feature where upon key entry the inside knob unlocks automatically; It has an indicator on this inside knob advising the occupant of the locking status of the lock e. It is a Lockwood Deadlatch. Title: Fitting Instructions. Deadlock is a general term used to describe a lock that requires a key for both locking and unlocking. Usually deadlocks have a key on both sides of the lock which prohibits unauthorised unlocking should the lock be accessed by breaking a nearby window to reach the lock from the inside.
Lockwood Double Cylinder Deadlatch, with lock alert status indicator and safety release. Continues to be the most popular deadlatch in the Australian market. Deadlatch Instructions. This is the instructions that come with the lock to allow you to install the lock. You can simply print the instructions and use them. Our locksmiths will be adding more instructions to our Lock shop over time.
Please email our locksmiths if you need instructions for your deadlatch and they are not listed. Outstanding Features. It is worth noting, too, that it can operate in Double Cylinder Deadlatch with safety release. When the new design came onto the market it had a design fault and couple of installation issues that were quickly overcome. Lockwood Digital Deadbolt User Manual. Hide thumbs. The Lockwood uses a 32mm hole. Plates can be used to cover the larger size hole and make the lock look presentable from the front of the door, but this still dose not fix the problem of the extra 20mm of material removed from the door.
The new Lockwood cylinder is completely floating in an oversize hole in the door, with a 20mm void around the lock cylinder. To overcome this problem, we have designed the Lockwood sleeve to recenter the front lock cylinder and fill the 20mm void with solid material. You can not simply dig under any plate and force the cylinder as you can with using damage plates. The second problem when converting a deadbolt to a Lockwood is the latch of the current deadbolt is fitted into the door, as the new Lockwood is fitted to the back of the door, this will leave a long hole on the edge of the door and also into the door.
To fix this problem the new Lockwood Sleeve has a face plate to fill this area. The third problem with such a product to allow a new lock installation is, the new footprint of the Lockwood needs to be attached to the door. The 52mm old footprint is in the place of the mounting screws of the new Lockwood Our locksmiths have designed the new Lockwood Sleeve to allow you to secure the mounting plate to the sleeve, giving the Lockwood a solid installation screw once again in place of where a void was left.
You can see in this image below that the old footprint has removed the material from the door to install the new Lockwood lock. The Lockwood Sleeve provides the new lock to be mounted to the door with all four install screws. The above image shows how the removed material from the door is replace with solid steel that has a tapped screw to accommodate the top rear screw need for a Locksmith installation. Left and right doors can create a problem, if you need to carry parts for both.
This is why our Locksmiths have designed this product with the ability to be used on both left and right doors. The Lockwood Sleeve has a slide to accommodate the shaft that fills the old latch section. Strength of the door and the strength of the new lock installation needs to be as strong as a fresh installation. To achieve this the Sleeve was designed to fill all voids with a solid steel, that is stronger than most doors. Strength can also be added by connecting all parts together, this maximises the strength in the product and the door.
Step 3. Insert the Lockwood sleeve into the door and the latch tube. Interlock them together with the side slide connector.
0コメント