Table of Contents. This ice maker is not designed to keep ice frozen. After each use, remove all. Previous Page. Next Page. After each use, remove all ice cubes, drain the water. Do not touch hot surfaces. Use handles or knobs. To protect against electrical hazards, do not immerse cord, plugs, or the appliance in water or other liquid. Dispose of property in accordance with federal or local regulations.
Flammable refrigerant used. The ice maker should be installed in accordance with the safety standard for refrigeration systems, ashrae Cover 2. Control Panel a. Add Water Indicator Light b.
Ice Full Indicator Light c. Simply search and order an immediate download for the refrigerator service manual and get to fixing your refrigerator in no time. We sell service manuals for almost every brand. Our repair manuals are available as a pdf download that will immediately provide you with key repair information you need. Most will include parts lists, disassembly, diagnostics, wiring diagrams, Error codes, component testing, and much more. The water inlet valve is an electrically-controlled mechanical valve that opens to supply water to the dispenser and ice maker.
The valve requires at least 20 psi to function properly. Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to check for power continuity to the water inlet valve.
If the ice maker is not working it could be that the ice maker assembly itself is defective. There are several components in the control module of the ice maker that can fail, and most are not sold separately. Also, ice makers have a relatively short lifespan, and may not always be worth fixing. If other, simpler parts like the water inlet valve or shut-off arm have been ruled out, and the only thing left is the ice maker itself, replace it as a unit.
If the ice maker is not working the ice level control board might be defective. The refrigerator is equipped with an infrared light beam to detect the level of ice in the ice bucket. As the level of ice reaches the top, the beam is interrupted and the ice maker shuts off.
As ice is used up and the level of ice drops below the beam, the ice maker starts up again. If the ice level control board fails, the ice maker will stop making ice.
If the ice maker is not working, the icemaker mold thermostat might be defective. Inside the control module of the ice maker is a thermostat which monitors the temperature of the ice mold ice tray.
Once the mold reaches the proper temperature, the ice maker starts a harvest cycle by ejecting the ice cubes and refilling with water. If the mold thermostat is defective, the ice maker doesn't advance. The thermostat can be checked for continuity. Replace it as needed.
The freezer temp should be between degrees for optimum performance. There is an ice fill adjustment screw. Mine is behind the white square cover on front of the ice maker. Turn screw half turn and let it run a day or two before making more adjustments. Fix Your Stuff Community Store.
0コメント